Please note: there is a groove throught the pointed end . Looks a hole an apx 1/8" hole was drilled through it and ground down to the point the side of the hole was removed.

The hole is in the solid tip material and doesn't go through to the inside cavity.

The horn pictured, is the horn you receive.

If you aren't looking for a specific horn and don't mind that they are pulled at random, see the "Large Polished Water Buffalo / Cow horns " category for single or bulk horns.
The horns have been cleaned.(although you will need to also further clean, disinfect, sanitize and seal the horn before using for your craft project). Some of the horns insides could have a gamey smell until further cleaned).

The horn is apx 12-1/2" in length x 2-1/2" x 2" diameter (open bell end).
The horn has a quick curve and twisting .
Thick Walled on the bell end with a small to medium volume cavity within. (8).
Nice tan marbling on the bell end .

Horns are a great addition to many different craft projects including shooting bag powder horns, Bow nocks, hunting horn and free-trapper products, just to name a few.
All horns are measured with a seamstress ruler from the bell end to the tip end on the outside curve following any twisting. Horns are not measured with a metal (slide) ruler nor in a straight line.

Wholesale Prices in Price Matrix.